Sandpaper and a wire brush are the bare minimum. A grinder with a wire wheel helps tremendously but is not 100% necessary for the process. You’ll need a surface to mix the epoxy on and a scraper or putty knife to mix with. In the kit you’ll get gloves, wedges, and epoxy. You’ll also need a small container of acetone to clean the pan saver and the cleaned oil pan that is currently on your truck.
Quick List:
- Acetone
- Scraper/Putty Knife
- Rags
- Epoxy mixing surface
- Wire brush
- Sandpaper
- Angle Grinder or die grinder with a wire wheel/sandpaper attachment is optional but very helpful
- New Oil Filter
- Blocks and a floor jack to hold the pan saver in place